Septic Tank Repair Union City GA

Tips to be a Successful Septic Tank Owner

The average household septic tank system should be inspected at least every three years by a professional septic tank company. Residential septic tanks are typically pumped every three to five years.

Four major factors influence the frequency of septic tank pumping:

•Size of Household
•Total wastewater generated
•Volume of solids in wastewater
•Size of septic tank

What happens when a septic tank company is coming to inspect your septic tank:

When you call a Union City septic tank company, they will inspect for leaks and examine the scum and sludge layers in your septic tank.

It is important to keep maintenance records on the work performed on your septic tank system.

Your septic tank includes a T-shaped outlet which prevents sludge and scum from leaving the septic tank and traveling to the drainfield area. If the bottom of the scum layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the outlet, your septic tank needs to be pumped.

To keep track of when to pump out your tank, keep a diary of the sludge and scum levels found by the septic professional.

The licensed plumbing company should note repairs completed and the septic tank condition in your system’s service report. If other repairs are recommended, hire a Union City  professional septic tank company soon.


Previous | Next


What Is an Anaerobic Septic System?

How Much Does It Cost To Empty Septic Tank

When it comes to plumbing jobs, there are those that can only be done by contracting a company in [post_name] to come and do them, for example rehabilitation of the main sewer line. However, smaller jobs like unblocking the sink can be done by a plumber that services [post_name].

Cleaning an average sewer pipe will require the people involved to do more than just a routine drain and snake auger. You will need to make use of the advanced pressurized water jets to make any progress with the sewers.

The maintenance process will not always cost the same amount of money and time. If your sewer is broken, you will be required to spend much more money and time.

Broken sewers in most cases will require that the plumber digs up your basement floor and does excavations all over your yard. This is why it will definitely cost more than would have been the case if it meant just unblocking a pipe.


Pressure Jetting Services

How Do I Know When To Pump My Septic Tank

Ultra high pressure jetting can operate at pressures of around 2,750 bar. That's about 40,000 pounds per square inch, which is a serious amount of pressure. High pressure hydro blasting units can be powered by a diesel engine or an electric motor. They can be dual purpose and capable of switching from high pressure to ultra pressure by changing the pump that is being used.

The uses of UHP and HP hydro blasting are many and varied. They range from tank and vessel cleaning to surface preparation, as well as cold cutting. They are used in hazardous areas where excessive heat or the possibility of a spark could be dangerous due to gases or other substances presenting a potential risk.

The equipment should always be maintained to the best working order possible. This can be made possible through regular maintenance routines and inspections where any faulty or worn parts can be replaced if required.

Regular maintenance coupled with up to date training for the operators of the ultra high pressure jetting equipment and machinery is the best way to ensure a high level of safety for everyone involved.


New Drain Line Installation Union City Georgia