Tips to be a Successful Septic Tank Owner
The average household septic tank system should be inspected at least every three years by a professional septic tank company. Residential septic tanks are typically pumped every three to five years.
Four major factors influence the frequency of septic tank pumping:
•Size of Household
•Total wastewater generated
•Volume of solids in wastewater
•Size of septic tank
What happens when a septic tank company is coming to inspect your septic tank:
When you call a Acworth septic tank company, they will inspect for leaks and examine the scum and sludge layers in your septic tank.
It is important to keep maintenance records on the work performed on your septic tank system.
Your septic tank includes a T-shaped outlet which prevents sludge and scum from leaving the septic tank and traveling to the drainfield area. If the bottom of the scum layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the outlet, your septic tank needs to be pumped.
To keep track of when to pump out your tank, keep a diary of the sludge and scum levels found by the septic professional.
The licensed plumbing company should note repairs completed and the septic tank condition in your system’s service report. If other repairs are recommended, hire a Acworth professional septic tank company soon.
Septic Systems: The Inside Story
What is high pressure water jetting and how it works?
High pressure water jetting, also called as hydro-jetting, is a technique of cleaning and unblocking drains of clogs. The technique involves usage of water, which is jet at extremely high speed in order to clean the drains properly and remove the toughest of blockages that may exist in your drainage pipes. If the job is done professionally well, then you won't notice a clog at least in the near future.
Hydro- jetting drainage pipes functions the same way as power washing. If the blockage is stubborn and located far deep in a drainage pipe, the high pressure from this equipment, which is around 60000 PSI, can easily clear it and fix any drain blockage problem quickly.
Top benefits of hydro-jetting
Certainly there are some traditional methods that can deal with blocked drains. However, they can't match the effectiveness of the hydro-jetting. Snaking a drain or rooting it can never clean the pipe fully. Often the traditional techniques let many residues inside the drainage pipes even when the unblocking job is done. Some residues are very sticky and thus the process of clogging begins again.
Thinking from an environmental point, at a first glance, you may consider hydro-jetting as a waste of water, which is of course very valuable resource for the mankind. However, the hydro-jetting method doesn't actually waste water; instead it uses water for a very important purpose. If you are living near a lake or river, hydro jetting is the best alternative for you. Above all, this method doesn't involve usage of any harmful chemicals which may negatively impact the environment. And like other traditional methods, it doesn't bring the harmful bacteria from underground to the surface.
Yes, drain jetting is a good preventive measure. Regularly hydro-jetting will always keep your drainage system free of blockages!
So, what are you waiting for? Call the high pressure water jetting specialist in [post_name] today!
All About Septic Tanks
An anaerobic septic system is generally what most people who have septic system already have installed. It's been the most popular type partly because there has been so little to compete with it. They don't cost that much to install, they are relatively simple to maintain, and it's been accepted that this is the standard for residential systems. While the private sector has certainly embraced the anaerobic system, municipalities do not use these at all.
An anaerobic septic system breaks down waste product at a rather slow and inefficient rate. When considering the residential use of a septic system this could be found to be acceptable. By the consistent standard use and the fact that one household would have to work pretty hard to fill up the system there has been little question as to the efficiency of the system. Municipal use of such systems simply doesn't exist. These systems can not handle the large volumes of waste that they encounter on a daily basis. Thus, industrial systems are aerobic.
Anaerobic systems also tend to discharge a foul, repugnant sludge that is thick and slimy. It turns into what is known as a bio-mat. Aside from being a hazard to the environment this is also what eventually backs up the system and requires costly repairs. It may only happen once every 20 years, but the system will eventually stop working properly because of the bio-mat. The waste product that these septic system leave behind is considered to be an environmental hazard and is generally unhealthy to live around. The aerobic systems are starting to win favor among residential units because they tend to counteract all of the general negatives that the anaerobic systems offer.