Septic Tank Repair Union City GA

Tips to be a Successful Septic Tank Owner

The average household septic tank system should be inspected at least every three years by a professional septic tank company. Residential septic tanks are typically pumped every three to five years.

Four major factors influence the frequency of septic tank pumping:

•Size of Household
•Total wastewater generated
•Volume of solids in wastewater
•Size of septic tank

What happens when a septic tank company is coming to inspect your septic tank:

When you call a Union City septic tank company, they will inspect for leaks and examine the scum and sludge layers in your septic tank.

It is important to keep maintenance records on the work performed on your septic tank system.

Your septic tank includes a T-shaped outlet which prevents sludge and scum from leaving the septic tank and traveling to the drainfield area. If the bottom of the scum layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the outlet, your septic tank needs to be pumped.

To keep track of when to pump out your tank, keep a diary of the sludge and scum levels found by the septic professional.

The licensed plumbing company should note repairs completed and the septic tank condition in your system’s service report. If other repairs are recommended, hire a Union City  professional septic tank company soon.


Previous | Next


Septic Systems: The Inside Story

How Do I Know When To Pump My Septic Tank

Ultra high pressure jetting can operate at pressures of around 2,750 bar. That's about 40,000 pounds per square inch, which is a serious amount of pressure. High pressure hydro blasting units can be powered by a diesel engine or an electric motor. They can be dual purpose and capable of switching from high pressure to ultra pressure by changing the pump that is being used.

The uses of UHP and HP hydro blasting are many and varied. They range from tank and vessel cleaning to surface preparation, as well as cold cutting. They are used in hazardous areas where excessive heat or the possibility of a spark could be dangerous due to gases or other substances presenting a potential risk.

The equipment should always be maintained to the best working order possible. This can be made possible through regular maintenance routines and inspections where any faulty or worn parts can be replaced if required.

Regular maintenance coupled with up to date training for the operators of the ultra high pressure jetting equipment and machinery is the best way to ensure a high level of safety for everyone involved.


What Causes Septic Tanks to Back-Up?

Warning Signs Of A Full Septic Tank

Have you been told that you need high pressure jetting to clean blockage from your pipes? Recently someone brought up to me the pros of high pressure jetting and how it worked so wonderfully for them. After some research I figured out what it is and when you really have to turn to high pressure water jetting.

Before augers came along, plumbing had to be really frustrating. If you had a pipe that needed to be cleaned than you would have to tear it up and take it apart. Plumbers have to be so grateful for augers, but what do you do when they aren't strong enough to clear out a blockage?

Do not try to rent one of these systems and use them yourself if you are not a trained professional. You could end up wasting money and still not be able to work the machine properly to relieve the clog from the drain.

You'll never need to have a plumber use high pressure jetting more than once a year. It is powerful and will completely clean out your drain. If you have questions or maybe if you think you need this in your home, call your trusted plumber in [post_name] to find out if they have this great service.


New Drain Line Installation Union City Georgia