Emergency Septic Service Lawrenceville GA

Tips to be a Successful Septic Tank Owner

The average household septic tank system should be inspected at least every three years by a professional septic tank company. Residential septic tanks are typically pumped every three to five years.

Four major factors influence the frequency of septic tank pumping:

•Size of Household
•Total wastewater generated
•Volume of solids in wastewater
•Size of septic tank

What happens when a septic tank company is coming to inspect your septic tank:

When you call a Lawrenceville septic tank company, they will inspect for leaks and examine the scum and sludge layers in your septic tank.

It is important to keep maintenance records on the work performed on your septic tank system.

Your septic tank includes a T-shaped outlet which prevents sludge and scum from leaving the septic tank and traveling to the drainfield area. If the bottom of the scum layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the outlet, your septic tank needs to be pumped.

To keep track of when to pump out your tank, keep a diary of the sludge and scum levels found by the septic professional.

The licensed plumbing company should note repairs completed and the septic tank condition in your system’s service report. If other repairs are recommended, hire a Lawrenceville  professional septic tank company soon.


Previous | Next


High Pressure Water Jetting - Basics You Must Know

Septic System Problems Odor

Two Components

Class 4 septic systems are divided into two components, the septic tank and the septic field or leaching bed. Waste is piped out of the house into the septic tank, which is essentially a water clarification tank, in which anaerobic bacteria break the waste down into solids (sludge), liquid effluent, and scum.

Septic System

The solids settle to the bottom, the scum floats to the top and the liquid effluent flows through an outlet pipe into a distribution chamber, where it is directed to the septic field. The septic field is an effluent water disposal system, where the liquid is channeled through perforated pipes to different parts of a field of loose gravel.

Septic tank materials that initially float in the scum layer are kept out of the drainage system by an outflow tee or baffle. If the tank is not pumped regularly, the level of solids can rise, and if it approaches the level of the outflow tee, scum and solids can proceed out into the drainage system, clogging the pipes and gravel - and eventually preventing the absorption of the water by the surrounding earth.

A Class 5 septic system is a holding tank for the storage of sewage at the site where it is produced. A typical holding tank system is comprised of a single compartment tank with a pump-out stack and an audible or visual warning device to alert the homeowner when the tank requires emptying. A holding tank is costly to operate, places restrictions of the owner, and is dependent on Class 7 (hauled) sewage system for waste collection and disposal.

General Guidelines for Purchasers

  • If the system is 5-7 years old and has never been pumped it is unlikely that there are serious problems.
  • If there is no record of the system having been pumped but the owner has a vague recollection of pumping the system at some time in the distant past, figure that it has never been pumped.
  • If the system is over 10 years old and has never been pumped, it is possible that there has been some damage to the septic field, and if it's not been pumped for over 15 years it is quite likely.
  • Flushing dye through the system looks good but will only indicate systems that are already seriously clogged, in which case there should already be more obvious signs.
  • Flushing dye may not indicate serious defects or indicate systems that are close to failure but still functional.
  • If you are on a septic system, adding a bedroom, even without adding a bathroom, may mean having to increase the size of the tank and drainage field.

The only way to make an accurate determination of the system is to have a licensed septic contractor in [post_name] perform a tank, distribution chamber and field inspection.

Septic Systems: Their Problems and Maintenance

How Do I Know When To Pump My Septic Tank

High pressure water jetting has many uses. It can be used to cut materials, for various cleaning projects and many other applications. As long as proper care is taken, using these machines is safe, does not involve the use of chemicals, unless needed for a particular job, and offers a high level of accuracy. However, with that said, the following are precautionary methods that should be implemented to ensure safety.

First of all, only qualified individuals should operate such machinery. After all, a high pressure water jet can operate anywhere from 55 to 60,000 psi. Such high velocity water could potentially cause major damage. Whoever is operating the machine should also have read and fully understand operating instructions, including the portion about safety. During operation, a hard hat that has face goggles and a visor should be worn, along with non-slip shoes, impermeable gloves and a PVC-suit. The environment in which one of these machines will be used should be clear of any loose debris.

Water jetting is a great solution for many applications. However, there are some dangers associated with this process. Proper training and knowledge of safety measures are crucial for whoever will operate the machine. Those who will operate the water jet should be certified, wear proper safety gear and adhere to the above-mentioned precautionary methods. In conclusion, using these machines offers many positives, but should an error occur, serious injuries can result.


Unclogging Main Sewer Line Lawrenceville Georgia