Tips to be a Successful Septic Tank Owner
The average household septic tank system should be inspected at least every three years by a professional septic tank company. Residential septic tanks are typically pumped every three to five years.
Four major factors influence the frequency of septic tank pumping:
•Size of Household
•Total wastewater generated
•Volume of solids in wastewater
•Size of septic tank
What happens when a septic tank company is coming to inspect your septic tank:
When you call a Acworth septic tank company, they will inspect for leaks and examine the scum and sludge layers in your septic tank.
It is important to keep maintenance records on the work performed on your septic tank system.
Your septic tank includes a T-shaped outlet which prevents sludge and scum from leaving the septic tank and traveling to the drainfield area. If the bottom of the scum layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the outlet, your septic tank needs to be pumped.
To keep track of when to pump out your tank, keep a diary of the sludge and scum levels found by the septic professional.
The licensed plumbing company should note repairs completed and the septic tank condition in your system’s service report. If other repairs are recommended, hire a Acworth professional septic tank company soon.
Septic Tanks - Ensuring Water Quality
Understanding septic systems capabilities and limits is needed to ensure water quality. A septic system is a type of On-Site Sewage Facility and is a self-contained, underground waste-water treatment system. By using natural processes to treat the waste-water on-site, septic systems do not require the installation of miles of sewer lines, making them less disruptive to the environment. A septic system consists of a septic tank, a distribution system and a soil absorption system, also called a drain field. The septic tank is a watertight box, sometimes made out of concrete or fiberglass, with an inlet and outlet pipe. The septic tank treats the waste-water naturally by holding it in the tank long enough for solids and liquids to separate. The waste-water forms three layers inside the tank. Solids lighter than water float to the top forming a layer of scum.
Solids heavier than water settle at the bottom of the tank forming a layer of sludge. This leaves a middle layer of partially clarified waste-water. The layers of sludge and scum remain in the septic tank where bacteria found naturally in the waste-water work to break the solids down. The sludge and scum that cannot be broken down are retained in the tank until the tank is pumped. The layer of liquid flows from the septic tank to the drain field. A drain a series of trenches lined with gravel or sand and below the ground. The drain field treats the waste-water by allowing it to slowly trickle from the pipes out into the gravel and down through the soil. The remaining impurities are trapped and disposed of in the soil. The excess water is eliminated through percolation into the soil, and eventually returning to the ground water, through evaporation, and by uptake through plants and transpiration.
The Center for Watershed Protection notes that septic systems can be effective methods of water treatment, however failures are common in many areas. Even properly functioning septic systems can leak and are not designed to effectively deal with most of the phosphorus and nitrogen load found in the water it treats. Pathogenic fecal bacteria are also a concern. The primary concern for a municipality is proper maintenance of septic systems, and in some cases the total load of partially treated pollutants that can impact local drinking water and wildlife in [post_name]. A solid understanding of septic systems capabilities and limits, and a good government plan is needed to ensure water quality.
Pressure Jetting Services
Septic systems fulfill a crucial function for many homes and businesses, especially in rural areas, though many people are clueless as to how they work. While septic tanks are usually low-maintenance systems, they can become extremely tricky and expensive if something goes wrong. A basic knowledge is important to anyone wishing to avoid future problems with their septic tanks.
What is a septic system?
Septic systems are small-scale sewage treatment systems that are used in areas not connected to a sewage system operated by the government or a private company. They are often used by homes and farms in rural areas where it is too costly to connect to faraway sewage mains. Septic systems work by pumping wastewater from bathrooms, kitchens and laundry facilities into effluent tanks, which process the waste and then disperse it onto a septic drain field.
What is a septic tank?
What happens to waste that doesn't decompose?
Some of the contents of the effluent tank will not decompose; therefore it is important to empty the tank occasionally. If tanks are not pumped the septic tank can fill with undecomposed substances that will be pumped into the drainage field. This can result in environmental problems in [post_name] as well as expensive repairs. How often the tank needs to be pumped clean varies depending on its size, the number of people using it and the outside temperature. Because there are so many variables, there is no rule of thumb for how often the tanks should be pumped: some need it every few years while other can go between 10 and 20 years without pumping. Have a professional inspect your tank to let you know when it needs to be pumped.