Tips to be a Successful Septic Tank Owner
The average household septic tank system should be inspected at least every three years by a professional septic tank company. Residential septic tanks are typically pumped every three to five years.
Four major factors influence the frequency of septic tank pumping:
•Size of Household
•Total wastewater generated
•Volume of solids in wastewater
•Size of septic tank
What happens when a septic tank company is coming to inspect your septic tank:
When you call a Union City septic tank company, they will inspect for leaks and examine the scum and sludge layers in your septic tank.
It is important to keep maintenance records on the work performed on your septic tank system.
Your septic tank includes a T-shaped outlet which prevents sludge and scum from leaving the septic tank and traveling to the drainfield area. If the bottom of the scum layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the outlet, your septic tank needs to be pumped.
To keep track of when to pump out your tank, keep a diary of the sludge and scum levels found by the septic professional.
The licensed plumbing company should note repairs completed and the septic tank condition in your system’s service report. If other repairs are recommended, hire a Union City professional septic tank company soon.
Hydro Jetting - Washing Drain Pipes, Sewer and Conduits With Pressurized Water
An anaerobic septic system is generally what most people who have septic system already have installed. It's been the most popular type partly because there has been so little to compete with it. They don't cost that much to install, they are relatively simple to maintain, and it's been accepted that this is the standard for residential systems. While the private sector has certainly embraced the anaerobic system, municipalities do not use these at all.
An anaerobic septic system breaks down waste product at a rather slow and inefficient rate. When considering the residential use of a septic system this could be found to be acceptable. By the consistent standard use and the fact that one household would have to work pretty hard to fill up the system there has been little question as to the efficiency of the system. Municipal use of such systems simply doesn't exist. These systems can not handle the large volumes of waste that they encounter on a daily basis. Thus, industrial systems are aerobic.
Anaerobic systems also tend to discharge a foul, repugnant sludge that is thick and slimy. It turns into what is known as a bio-mat. Aside from being a hazard to the environment this is also what eventually backs up the system and requires costly repairs. It may only happen once every 20 years, but the system will eventually stop working properly because of the bio-mat. The waste product that these septic system leave behind is considered to be an environmental hazard and is generally unhealthy to live around. The aerobic systems are starting to win favor among residential units because they tend to counteract all of the general negatives that the anaerobic systems offer.
High Pressure Water Jetting
High pressure water jetting has many uses. It can be used to cut materials, for various cleaning projects and many other applications. As long as proper care is taken, using these machines is safe, does not involve the use of chemicals, unless needed for a particular job, and offers a high level of accuracy. However, with that said, the following are precautionary methods that should be implemented to ensure safety.
First of all, only qualified individuals should operate such machinery. After all, a high pressure water jet can operate anywhere from 55 to 60,000 psi. Such high velocity water could potentially cause major damage. Whoever is operating the machine should also have read and fully understand operating instructions, including the portion about safety. During operation, a hard hat that has face goggles and a visor should be worn, along with non-slip shoes, impermeable gloves and a PVC-suit. The environment in which one of these machines will be used should be clear of any loose debris.
Water jetting is a great solution for many applications. However, there are some dangers associated with this process. Proper training and knowledge of safety measures are crucial for whoever will operate the machine. Those who will operate the water jet should be certified, wear proper safety gear and adhere to the above-mentioned precautionary methods. In conclusion, using these machines offers many positives, but should an error occur, serious injuries can result.