Tips to be a Successful Septic Tank Owner
The average household septic tank system should be inspected at least every three years by a professional septic tank company. Residential septic tanks are typically pumped every three to five years.
Four major factors influence the frequency of septic tank pumping:
•Size of Household
•Total wastewater generated
•Volume of solids in wastewater
•Size of septic tank
What happens when a septic tank company is coming to inspect your septic tank:
When you call a Union City septic tank company, they will inspect for leaks and examine the scum and sludge layers in your septic tank.
It is important to keep maintenance records on the work performed on your septic tank system.
Your septic tank includes a T-shaped outlet which prevents sludge and scum from leaving the septic tank and traveling to the drainfield area. If the bottom of the scum layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the outlet, your septic tank needs to be pumped.
To keep track of when to pump out your tank, keep a diary of the sludge and scum levels found by the septic professional.
The licensed plumbing company should note repairs completed and the septic tank condition in your system’s service report. If other repairs are recommended, hire a Union City professional septic tank company soon.
High Pressure Water Jetting - Basics You Must Know
Septic tanks are designed to hold human biological waste material right until bacteria break it down into gases, solids and water. The tank itself is usually made from concrete, but can also be built from non-degradable materials. It is very important to take proper care and maintain your septic system so that they work properly at all times.
Septic Systems And Their Problems
Some of the most common problems in septic systems are the following:
• Use Of Strong Chemicals: Toxic chemicals such as gasoline, motor oil, solvents, pesticides and other chemical products that are put into the drain harm the nearby soil, making it unfit for the growth of plants. They also destroy the bacteria needed to break down the waste in the tank.
• Flushing Down Non-Biodegradable Items: These items never break down naturally and only fill up space. It only ups the liquid levels in the tank and causes clogging.
• Too Much Water In The Tank: When there is too much water in the tank, the waste does not get a chance to break down, and this eventually blocks the distribution tubes.
• Use Of Too Much Detergent: Overuse of detergents cause a lot of problems with your pipes and tanks as the excess residue can stick to the sides and corrode the pipes.
These are just some of the common problems and preventive measures that you need to keep in mind when it comes to your septic tanks.
Hydro Jetting - Washing Drain Pipes, Sewer and Conduits With Pressurized Water
For many people, the science behind new technologies that have been developed to clean sewer drains couldn't be more mundane. Not many homeowners in [post_name] care much about methods to unblock a badly clogged drain until it becomes necessary for them to use the technology for themselves. High pressure water drain jetting is a relatively recent development that allows drain cleaners to literally blast obstructions out of your drains, but it doesn't just consist of a hose that sprays a stream of water. Instead, high pressure water drain jet systems are sophisticated pieces of equipment that often cost tens of thousands of dollars.
High pressure water jetting isn't the right choice for every kind of clog. Simpler clogs can often be fixed by a less expensive sewer snake or other means. If your drain has significant problems from layers of heavy built up debris and grease, however, the drain jet is the best option. Although it is slightly more costly, a professionally applied high pressure drain jetting can make your blocked pipes look and operate like new again.