Tips to be a Successful Septic Tank Owner
The average household septic tank system should be inspected at least every three years by a professional septic tank company. Residential septic tanks are typically pumped every three to five years.
Four major factors influence the frequency of septic tank pumping:
•Size of Household
•Total wastewater generated
•Volume of solids in wastewater
•Size of septic tank
What happens when a septic tank company is coming to inspect your septic tank:
When you call a Stone Mountain septic tank company, they will inspect for leaks and examine the scum and sludge layers in your septic tank.
It is important to keep maintenance records on the work performed on your septic tank system.
Your septic tank includes a T-shaped outlet which prevents sludge and scum from leaving the septic tank and traveling to the drainfield area. If the bottom of the scum layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the outlet, your septic tank needs to be pumped.
To keep track of when to pump out your tank, keep a diary of the sludge and scum levels found by the septic professional.
The licensed plumbing company should note repairs completed and the septic tank condition in your system’s service report. If other repairs are recommended, hire a Stone Mountain professional septic tank company soon.
Septic Tanks - Ensuring Water Quality
Class 4 septic systems are divided into two components, the septic tank and the septic field or leaching bed. Waste is piped out of the house into the septic tank, which is essentially a water clarification tank, in which anaerobic bacteria break the waste down into solids (sludge), liquid effluent, and scum.
The solids settle to the bottom, the scum floats to the top and the liquid effluent flows through an outlet pipe into a distribution chamber, where it is directed to the septic field. The septic field is an effluent water disposal system, where the liquid is channeled through perforated pipes to different parts of a field of loose gravel.
Septic tank materials that initially float in the scum layer are kept out of the drainage system by an outflow tee or baffle. If the tank is not pumped regularly, the level of solids can rise, and if it approaches the level of the outflow tee, scum and solids can proceed out into the drainage system, clogging the pipes and gravel - and eventually preventing the absorption of the water by the surrounding earth.
A Class 5 septic system is a holding tank for the storage of sewage at the site where it is produced. A typical holding tank system is comprised of a single compartment tank with a pump-out stack and an audible or visual warning device to alert the homeowner when the tank requires emptying. A holding tank is costly to operate, places restrictions of the owner, and is dependent on Class 7 (hauled) sewage system for waste collection and disposal.
General Guidelines for Purchasers
- If the system is 5-7 years old and has never been pumped it is unlikely that there are serious problems.
- If there is no record of the system having been pumped but the owner has a vague recollection of pumping the system at some time in the distant past, figure that it has never been pumped.
- If the system is over 10 years old and has never been pumped, it is possible that there has been some damage to the septic field, and if it's not been pumped for over 15 years it is quite likely.
- Flushing dye through the system looks good but will only indicate systems that are already seriously clogged, in which case there should already be more obvious signs.
- Flushing dye may not indicate serious defects or indicate systems that are close to failure but still functional.
- If you are on a septic system, adding a bedroom, even without adding a bathroom, may mean having to increase the size of the tank and drainage field.
What Causes Septic Tanks to Back-Up?
What is high pressure water jetting and how it works?
High pressure water jetting, also called as hydro-jetting, is a technique of cleaning and unblocking drains of clogs. The technique involves usage of water, which is jet at extremely high speed in order to clean the drains properly and remove the toughest of blockages that may exist in your drainage pipes. If the job is done professionally well, then you won't notice a clog at least in the near future.
Hydro- jetting drainage pipes functions the same way as power washing. If the blockage is stubborn and located far deep in a drainage pipe, the high pressure from this equipment, which is around 60000 PSI, can easily clear it and fix any drain blockage problem quickly.
Top benefits of hydro-jetting
Certainly there are some traditional methods that can deal with blocked drains. However, they can't match the effectiveness of the hydro-jetting. Snaking a drain or rooting it can never clean the pipe fully. Often the traditional techniques let many residues inside the drainage pipes even when the unblocking job is done. Some residues are very sticky and thus the process of clogging begins again.
Thinking from an environmental point, at a first glance, you may consider hydro-jetting as a waste of water, which is of course very valuable resource for the mankind. However, the hydro-jetting method doesn't actually waste water; instead it uses water for a very important purpose. If you are living near a lake or river, hydro jetting is the best alternative for you. Above all, this method doesn't involve usage of any harmful chemicals which may negatively impact the environment. And like other traditional methods, it doesn't bring the harmful bacteria from underground to the surface.
Yes, drain jetting is a good preventive measure. Regularly hydro-jetting will always keep your drainage system free of blockages!
So, what are you waiting for? Call the high pressure water jetting specialist in [post_name] today!