Replace Sewer Line Blairsville GA

Tips to be a Successful Septic Tank Owner

The average household septic tank system should be inspected at least every three years by a professional septic tank company. Residential septic tanks are typically pumped every three to five years.

Four major factors influence the frequency of septic tank pumping:

•Size of Household
•Total wastewater generated
•Volume of solids in wastewater
•Size of septic tank

What happens when a septic tank company is coming to inspect your septic tank:

When you call a Blairsville septic tank company, they will inspect for leaks and examine the scum and sludge layers in your septic tank.

It is important to keep maintenance records on the work performed on your septic tank system.

Your septic tank includes a T-shaped outlet which prevents sludge and scum from leaving the septic tank and traveling to the drainfield area. If the bottom of the scum layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the outlet, your septic tank needs to be pumped.

To keep track of when to pump out your tank, keep a diary of the sludge and scum levels found by the septic professional.

The licensed plumbing company should note repairs completed and the septic tank condition in your system’s service report. If other repairs are recommended, hire a Blairsville  professional septic tank company soon.


Previous | Next


The ABC Of High Pressure Jetting

Septic Tank Maintenance Cost

Understanding septic systems capabilities and limits is needed to ensure water quality. A septic system is a type of On-Site Sewage Facility and is a self-contained, underground waste-water treatment system. By using natural processes to treat the waste-water on-site, septic systems do not require the installation of miles of sewer lines, making them less disruptive to the environment. A septic system consists of a septic tank, a distribution system and a soil absorption system, also called a drain field. The septic tank is a watertight box, sometimes made out of concrete or fiberglass, with an inlet and outlet pipe. The septic tank treats the waste-water naturally by holding it in the tank long enough for solids and liquids to separate. The waste-water forms three layers inside the tank. Solids lighter than water float to the top forming a layer of scum.

Solids heavier than water settle at the bottom of the tank forming a layer of sludge. This leaves a middle layer of partially clarified waste-water. The layers of sludge and scum remain in the septic tank where bacteria found naturally in the waste-water work to break the solids down. The sludge and scum that cannot be broken down are retained in the tank until the tank is pumped. The layer of liquid flows from the septic tank to the drain field. A drain a series of trenches lined with gravel or sand and below the ground. The drain field treats the waste-water by allowing it to slowly trickle from the pipes out into the gravel and down through the soil. The remaining impurities are trapped and disposed of in the soil. The excess water is eliminated through percolation into the soil, and eventually returning to the ground water, through evaporation, and by uptake through plants and transpiration.

The Center for Watershed Protection notes that septic systems can be effective methods of water treatment, however failures are common in many areas. Even properly functioning septic systems can leak and are not designed to effectively deal with most of the phosphorus and nitrogen load found in the water it treats. Pathogenic fecal bacteria are also a concern. The primary concern for a municipality is proper maintenance of septic systems, and in some cases the total load of partially treated pollutants that can impact local drinking water and wildlife in [post_name]. A solid understanding of septic systems capabilities and limits, and a good government plan is needed to ensure water quality.


A Closer Look at UHP Hydro Blasting Companies and What They Do

Septic Tank Pump Out Service

High pressure water jetting has many uses. It can be used to cut materials, for various cleaning projects and many other applications. As long as proper care is taken, using these machines is safe, does not involve the use of chemicals, unless needed for a particular job, and offers a high level of accuracy. However, with that said, the following are precautionary methods that should be implemented to ensure safety.

First of all, only qualified individuals should operate such machinery. After all, a high pressure water jet can operate anywhere from 55 to 60,000 psi. Such high velocity water could potentially cause major damage. Whoever is operating the machine should also have read and fully understand operating instructions, including the portion about safety. During operation, a hard hat that has face goggles and a visor should be worn, along with non-slip shoes, impermeable gloves and a PVC-suit. The environment in which one of these machines will be used should be clear of any loose debris.

Water jetting is a great solution for many applications. However, there are some dangers associated with this process. Proper training and knowledge of safety measures are crucial for whoever will operate the machine. Those who will operate the water jet should be certified, wear proper safety gear and adhere to the above-mentioned precautionary methods. In conclusion, using these machines offers many positives, but should an error occur, serious injuries can result.


Chemical Treatments Blairsville Georgia