Plumbing Woes Got You Down?
How about some tips regarding plumbing and your septic system? This is something that you will always be able to use for the rest of your life. You owe it to yourself and your family to take a few minutes and read this article in order to get the best advice on plumbing.
Plumbing is not only related to water, there are many other skills required to be a good plumber. One of the most common things that a Atlanta plumber works on is fixing water lines. This may seem very easy, but there are many nuances to it, so it shouldn’t be undertaken lightly.
Never pour grease into the kitchen sink. Pouring grease into your kitchen sink is the best way to clog up the pipes, at which point it will be very difficult to penetrate the grease to stop the clog without a bit of a cost involved. You should expose of grease appropriately without exception.
Check the plumbing in your home. If your home has the flexible gray polybutylene water pipes, you need to have a plumber come out and assess their condition. These types of pipe are prone to failure and can lead to very costly repairs if they have a failure within your home.
Look online for reviews of the Atlanta plumbing contractor you are thinking of hiring. If people are not satisfied with the work that the plumber performs, many times they will go on the internet and post negative reviews. If they are happy with the Atlanta plumber, they will also post positive reviews.
Periodically, make sure that the sump pump in your house is working to full capacity. Pour a few gallons of water into the sump pit, and your pump should drain that water out with minimal issues. Checking that your devices are working throughout the year can pay large dividends in the event of a crisis.
To keep your septic tank in good working order, it is advisable to have it pumped out every five years. This prevents sediment from building up in the tank and causing a backup into your home or causing the failure of the septic system itself. While it may cost a bit to have your septic tank pumped out, it will cost you much more to clean up any sewage backup or to repair or replace your septic tank.
When your toilet clogs and a plunger will not release it, try a closet auger. This tool features a handle that you rotate in order to feed a line into the toilet drain. When you remove the auger from the drain, the clog should come with it, unless it’s past the length to which the auger can reach.
Avoid flushing cotton balls, cotton swabs and any feminine sanitary products down the toilet. Even small panty liners can cause big problems because their adhesive backing can stick to pipes and cause stoppages. Keep a small, covered wastebasket next to the toilet to encourage guests to properly dispose of used sanitary articles.
To summarize, you knew it would be a good idea to refresh yourself on a few plumbing tips or to get yourself a general background on it. There is a lot of advice available and hopefully you were able to find this article both informative and useful for your home.
What Are Septic Tanks and How Do They Work?
What is a Sewage Pump?
A sewage pump is used to transfer sewage liquids and solids from one place to another. Usually, in residential applications, sewage includes soft solids up to 2" in diameter is pumped from a sewage basin to a sewer system or a septic tank. A sewage pump is installed at the lowest point of the sewage basin.
Since the pump is submerged most of the time, it is also referred to as a submersible sewage pump. Sewage pump can be automatic, manual or dual mode. A dual mode pump contains a piggyback plug, which allows the pump to be used as either manual, wherein the pump bypasses the switch and is plugged in directly into the socket or as automatic, wherein the pump is plugged in through the floating switch and works only when the switch is activated.
Due to a possibility of sewage overflow, it is generally not advised to use a manual sewage pump inside of a sewage basin.
Sewage pumps are centrifugal pumps, with special design enabling solids to pass without clogging the pump. When the pump is turned on, the motor starts to rotate the impeller, creating the pressure that pushes water into the impeller and goes into the discharge pipe.
The sewage pump is powered through a 10-25 ft. electric cord. Depending on the model, the voltage can be 115, 230, 460, or 575 volts. The pump housing, which contains a motor and an impeller, is made with cast iron and is built for long term use.
Types of Sewage Pumps
• Check for a small 3/16 to 3/8 inch weep hole in the discharge pipe directly above it.
• Visually inspect all alarm mechanisms (if applicable), exposed metal parts and connections for corrosion. You may apply a silicone water repellant spray to deter corrosion. Refer to manufacturer usage instructions to apply silicone spray.
• Verify that there is a check valve in place on the drain line just above the pump cover. Contact a licensed plumber in [post_name] to add a check valve if one is not present.
• Check to make sure the air gap in between the interior and exterior discharge pipes should be open and clear of debris.
There are many pumping station facilities, including pumps and equipment for pumping fluids from one place to another. They are used for a variety of infrastructure systems, such as supplying water to canals, and the removal of sewage to the processing site. This station in sewage collection system also called lift station, are designed to handle raw sewage that is fed from underground pipelines.
Businesses in [post_name] can benefit from using sewage pumps as it can handle loads of water in a small amount of time. It is cost efficient if you have a sewage pump to handle those unwanted water and wet waste.
Learn more about how sewage pumps work and how they can help your business.
High Pressure Jetting
Septic tanks are designed to hold human biological waste material right until bacteria break it down into gases, solids and water. The tank itself is usually made from concrete, but can also be built from non-degradable materials. It is very important to take proper care and maintain your septic system so that they work properly at all times.
Septic Systems And Their Problems
Some of the most common problems in septic systems are the following:
• Use Of Strong Chemicals: Toxic chemicals such as gasoline, motor oil, solvents, pesticides and other chemical products that are put into the drain harm the nearby soil, making it unfit for the growth of plants. They also destroy the bacteria needed to break down the waste in the tank.
• Flushing Down Non-Biodegradable Items: These items never break down naturally and only fill up space. It only ups the liquid levels in the tank and causes clogging.
• Too Much Water In The Tank: When there is too much water in the tank, the waste does not get a chance to break down, and this eventually blocks the distribution tubes.
• Use Of Too Much Detergent: Overuse of detergents cause a lot of problems with your pipes and tanks as the excess residue can stick to the sides and corrode the pipes.
These are just some of the common problems and preventive measures that you need to keep in mind when it comes to your septic tanks.