Septic Tank Design Bowdon GA

Tips to be a Successful Septic Tank Owner

The average household septic tank system should be inspected at least every three years by a professional septic tank company. Residential septic tanks are typically pumped every three to five years.

Four major factors influence the frequency of septic tank pumping:

•Size of Household
•Total wastewater generated
•Volume of solids in wastewater
•Size of septic tank

What happens when a septic tank company is coming to inspect your septic tank:

When you call a Bowdon septic tank company, they will inspect for leaks and examine the scum and sludge layers in your septic tank.

It is important to keep maintenance records on the work performed on your septic tank system.

Your septic tank includes a T-shaped outlet which prevents sludge and scum from leaving the septic tank and traveling to the drainfield area. If the bottom of the scum layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the outlet, your septic tank needs to be pumped.

To keep track of when to pump out your tank, keep a diary of the sludge and scum levels found by the septic professional.

The licensed plumbing company should note repairs completed and the septic tank condition in your system’s service report. If other repairs are recommended, hire a Bowdon  professional septic tank company soon.


Previous | Next


Septic Pumping Is Really A Fact Of Life

Septic Tank Pump Out Service

What is high pressure water jetting and how it works?

High pressure water jetting, also called as hydro-jetting, is a technique of cleaning and unblocking drains of clogs. The technique involves usage of water, which is jet at extremely high speed in order to clean the drains properly and remove the toughest of blockages that may exist in your drainage pipes. If the job is done professionally well, then you won't notice a clog at least in the near future.

Hydro- jetting drainage pipes functions the same way as power washing. If the blockage is stubborn and located far deep in a drainage pipe, the high pressure from this equipment, which is around 60000 PSI, can easily clear it and fix any drain blockage problem quickly.

Top benefits of hydro-jetting

Effectiveness

Certainly there are some traditional methods that can deal with blocked drains. However, they can't match the effectiveness of the hydro-jetting. Snaking a drain or rooting it can never clean the pipe fully. Often the traditional techniques let many residues inside the drainage pipes even when the unblocking job is done. Some residues are very sticky and thus the process of clogging begins again.

Environment-Friendly

Thinking from an environmental point, at a first glance, you may consider hydro-jetting as a waste of water, which is of course very valuable resource for the mankind. However, the hydro-jetting method doesn't actually waste water; instead it uses water for a very important purpose. If you are living near a lake or river, hydro jetting is the best alternative for you. Above all, this method doesn't involve usage of any harmful chemicals which may negatively impact the environment. And like other traditional methods, it doesn't bring the harmful bacteria from underground to the surface.

Preventative Maintenance

Yes, drain jetting is a good preventive measure. Regularly hydro-jetting will always keep your drainage system free of blockages!

So, what are you waiting for? Call the high pressure water jetting specialist in [post_name] today!


All About Septic Tanks

Septic Tank Drainfield Problems

Septic tanks are designed to hold human biological waste material right until bacteria break it down into gases, solids and water. The tank itself is usually made from concrete, but can also be built from non-degradable materials. It is very important to take proper care and maintain your septic system so that they work properly at all times.

Septic Systems And Their Problems

Some of the most common problems in septic systems are the following:

Use Of Strong Chemicals: Toxic chemicals such as gasoline, motor oil, solvents, pesticides and other chemical products that are put into the drain harm the nearby soil, making it unfit for the growth of plants. They also destroy the bacteria needed to break down the waste in the tank.
Flushing Down Non-Biodegradable Items: These items never break down naturally and only fill up space. It only ups the liquid levels in the tank and causes clogging.
Too Much Water In The Tank: When there is too much water in the tank, the waste does not get a chance to break down, and this eventually blocks the distribution tubes.
Use Of Too Much Detergent: Overuse of detergents cause a lot of problems with your pipes and tanks as the excess residue can stick to the sides and corrode the pipes.

These are just some of the common problems and preventive measures that you need to keep in mind when it comes to your septic tanks.


Septic Tank Repair Bowdon Georgia