Tips to be a Successful Septic Tank Owner
The average household septic tank system should be inspected at least every three years by a professional septic tank company. Residential septic tanks are typically pumped every three to five years.
Four major factors influence the frequency of septic tank pumping:
•Size of Household
•Total wastewater generated
•Volume of solids in wastewater
•Size of septic tank
What happens when a septic tank company is coming to inspect your septic tank:
When you call a Blairsville septic tank company, they will inspect for leaks and examine the scum and sludge layers in your septic tank.
It is important to keep maintenance records on the work performed on your septic tank system.
Your septic tank includes a T-shaped outlet which prevents sludge and scum from leaving the septic tank and traveling to the drainfield area. If the bottom of the scum layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the outlet, your septic tank needs to be pumped.
To keep track of when to pump out your tank, keep a diary of the sludge and scum levels found by the septic professional.
The licensed plumbing company should note repairs completed and the septic tank condition in your system’s service report. If other repairs are recommended, hire a Blairsville professional septic tank company soon.
High Pressure Water Jetting - Basics You Must Know
Understanding septic systems capabilities and limits is needed to ensure water quality. A septic system is a type of On-Site Sewage Facility and is a self-contained, underground waste-water treatment system. By using natural processes to treat the waste-water on-site, septic systems do not require the installation of miles of sewer lines, making them less disruptive to the environment. A septic system consists of a septic tank, a distribution system and a soil absorption system, also called a drain field. The septic tank is a watertight box, sometimes made out of concrete or fiberglass, with an inlet and outlet pipe. The septic tank treats the waste-water naturally by holding it in the tank long enough for solids and liquids to separate. The waste-water forms three layers inside the tank. Solids lighter than water float to the top forming a layer of scum.
Solids heavier than water settle at the bottom of the tank forming a layer of sludge. This leaves a middle layer of partially clarified waste-water. The layers of sludge and scum remain in the septic tank where bacteria found naturally in the waste-water work to break the solids down. The sludge and scum that cannot be broken down are retained in the tank until the tank is pumped. The layer of liquid flows from the septic tank to the drain field. A drain a series of trenches lined with gravel or sand and below the ground. The drain field treats the waste-water by allowing it to slowly trickle from the pipes out into the gravel and down through the soil. The remaining impurities are trapped and disposed of in the soil. The excess water is eliminated through percolation into the soil, and eventually returning to the ground water, through evaporation, and by uptake through plants and transpiration.
The Center for Watershed Protection notes that septic systems can be effective methods of water treatment, however failures are common in many areas. Even properly functioning septic systems can leak and are not designed to effectively deal with most of the phosphorus and nitrogen load found in the water it treats. Pathogenic fecal bacteria are also a concern. The primary concern for a municipality is proper maintenance of septic systems, and in some cases the total load of partially treated pollutants that can impact local drinking water and wildlife in [post_name]. A solid understanding of septic systems capabilities and limits, and a good government plan is needed to ensure water quality.
High Pressure Jetting
What is high pressure water jetting and how it works?
High pressure water jetting, also called as hydro-jetting, is a technique of cleaning and unblocking drains of clogs. The technique involves usage of water, which is jet at extremely high speed in order to clean the drains properly and remove the toughest of blockages that may exist in your drainage pipes. If the job is done professionally well, then you won't notice a clog at least in the near future.
Hydro- jetting drainage pipes functions the same way as power washing. If the blockage is stubborn and located far deep in a drainage pipe, the high pressure from this equipment, which is around 60000 PSI, can easily clear it and fix any drain blockage problem quickly.
Top benefits of hydro-jetting
Certainly there are some traditional methods that can deal with blocked drains. However, they can't match the effectiveness of the hydro-jetting. Snaking a drain or rooting it can never clean the pipe fully. Often the traditional techniques let many residues inside the drainage pipes even when the unblocking job is done. Some residues are very sticky and thus the process of clogging begins again.
Thinking from an environmental point, at a first glance, you may consider hydro-jetting as a waste of water, which is of course very valuable resource for the mankind. However, the hydro-jetting method doesn't actually waste water; instead it uses water for a very important purpose. If you are living near a lake or river, hydro jetting is the best alternative for you. Above all, this method doesn't involve usage of any harmful chemicals which may negatively impact the environment. And like other traditional methods, it doesn't bring the harmful bacteria from underground to the surface.
Yes, drain jetting is a good preventive measure. Regularly hydro-jetting will always keep your drainage system free of blockages!
So, what are you waiting for? Call the high pressure water jetting specialist in [post_name] today!